Apr 11

Dropbox推薦計劃免費空間增加一倍至最多16GB

Computer Comments Off on Dropbox推薦計劃免費空間增加一倍至最多16GB

在現時眾多民用的雲端儲存供應商之中,發展得最積極的一位非Dropbox莫屬。雖然為每名註冊用戶提供的免費儲存空間只有2GB,對高用量的使用者來講不足。幸好官方有很多方法來助大家提升免費空間的容量,除了不同類型的帳號號、和其他廠商合作外,其中推薦計劃更是最有效升空間的方法。

官方剛於網站Blog上公佈,由即日起,免費用戶每推薦一位朋友使用Dropbox,雙方都可獲得的免費空間由原本的250MB提升一倍至500MB,上限也由原來的8GB提升至16GB。而付費的Pro用戶更可獲1GB至上限的32GB。

要邀請朋友的方法可以是經Email、Facebook、Twitter或上討論區等。只要登入後按此連結就可以獲得你自己的推薦連結,再把連結發給朋友即可。例如筆者的推薦連結為:http://db.tt/FNXknuZ3,如果你還沒有Dropbox帳號的話,只要透過這條連結申請帳號的話,你和筆者的Dropbox免費空間都會免費提升500MB,直至16GB的上限為止。

Jul 23

Install Windows 7 from USB Drive

Computer Comments Off on Install Windows 7 from USB Drive

Requirements:

*USB Flash Drive (Minimum 4GB)

*Windows 7 or Vista installation files.

Follow the below steps to create bootable Windows 7/Vista USB drive using which you can install Windows 7/Vista easily.

1. Plug-in your USB flash drive to USB port and move all the contents from USB drive to a safe location on your system.

2. Open Command Prompt with admin rights. Use any of the below methods to open Command Prompt with admin rights.

*Type cmd in Start menu search box and hit CtrlShiftEnter.

Or

*Go to Start menu > All programs > Accessories, right click on Command Prompt and select Run as administrator.

3. You need to know about the USB drive a little bit. Type in the following commands in the command prompt:

First type DISKPART and hit enter to see the below message.

Bootable USB Drive

Next type LIST DISK command and note down the Disk number (ex: Disk 1) of your USB flash drive. In the below screenshot my Flash Drive Disk no is Disk 1.

4. Next type all the below commands one by one. Here I assume that your disk drive no is “Disk 1”.If you have Disk 2 as your USB flash drive then use Disk 2.Refer the above step to confirm it.

So below are the commands you need to type and execute one by one:

SELECT DISK 1

CLEAN

CREATE PARTITION PRIMARY

SELECT PARTITION 1

ACTIVE

FORMAT FS=NTFS

(Format process may take few seconds)

ASSIGN

EXIT

Don’t close the command prompt as we need to execute one more command at the next step. Just minimize it.

Bootable USB Drive

5. Next insert your Windows7/Vista DVD into the optical drive and check the drive letter of the DVD drive. In this guide I will assume that your DVD drive letter is “D” and USB drive letter is “H” (open my computer to know about it).

6. Maximize the minimized Command Prompt in the 4th step.Type  the following command now:

D: CD BOOT and hit enter.Where “D” is your DVD drive letter.

CD BOOT and hit enter to see the below message.

7. Type another command given below to update the USB drive with BOOTMGR compatible code.

BOOTSECT.EXE /NT60 H:

14

Where “H” is your USB drive letter. Once you enter the above command you will see the below message.

8. Copy your Windows 7/Vista DVD contents to the USB flash drive.

9. Your USB drive is ready to boot and install Windows 7/Vista. Only thing you need to change the boot priority at the BIOS to USB from the HDD or CD ROM drive. I won’t explain it as it’s just the matter the changing the boot priority or enabling the USB boot option in the BIOS.

Note: If you are not able to boot after following this guide means you haven’t set the BIOS priority to USB. If you got any problem in following this guide feel free to ask questions by leaving comment.

 


Jun 03

Adobe CS5 Creative Suite 5.5 Master Collection

Computer Comments Off on Adobe CS5 Creative Suite 5.5 Master Collection

Adobe CS5 Creative Suite 5.5 Master Collection for MAC 影像、音效、網頁製作 繁體中文DVD版(內含InDesign+Photoshop+Illustrator+Flash+Dreamweaver+Fireworks+Premiere)
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-==
軟體名稱: Adobe CS5 Creative Suite 5.5 Master Collection
語系版本: 韓文/繁體中文DVD版
光碟片數: 單片裝(單面雙層 DVD)
保護種類: 註冊碼
破解說明: 見最底下
系統支援: 蘋果電腦 Mac OS X 10.6 以上版本(目前已知)
硬體需求: PC
軟體類型: 影像、音效、網頁製作
更新日期: 2011.04.30
軟體發行: Adobe(C.ORE)
官方網站: http://www.adobe.com/products/creativesuite/mastercollection
中文網站: http://www.adobe.com/tw/products/creativesuite/mastercollection
軟體簡介: (以官方網站為準)
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Adobe CS5 Creative Suite 5.5 Master Collection 包含的軟體有↓
Photoshop CS5 Extended
Illustrator CS5
InDesign CS5.5
Acrobat X Pro
Flash Catalyst CS5.5
Flash Professional CS5.5
Flash Builder 4.5
Dreamweaver CS5.5
Fireworks CS5
Contribute CS5
Premiere Pro CS5.5
After Effects CS5.5
Audition CS5.5
OnLocation CS5.5
Encore CS5.5
Bridge CS5
Device Central CS5.5

從開始到完成只需運用單一完整的方案,即可呈現您的內容 。Creative SuiteR 5
Master Collection 軟體可讓您設計和開發令人驚豔的內容、更有效率地協作,並
將內容發佈至任何地方。查看新功能

什麼是 Master Collection?
從開始到完成只需運用單一完整的方案,即可呈現您的內容。 Creative SuiteR 5
Master Collection 軟體可讓您設計和開發令人驚豔的內容、更有效率地協作,並
將內容發佈至任何地方。

擴展您的創意觸及面
運用 Illustrator 製作企業識別,以吸引線上客群。使用全新的 Flash Catalyst
CS5 來建立具表現力的互動式介面,毋需編寫程式碼。

設計並提供如臨現場的體驗
使用 Flash Professional CS5 讓您的微型網站和休閒遊戲設計在桌面、瀏覽器和
行動裝置上都能呈現一致效果,以吸引您的觀眾。

在各種螢幕上都能呈現您的作品
運用 Photoshop CS5 Extended 的高解析度影像來增強 HD 視訊製作。使用 After
Effects CS5 來加入細微的效果,然後在 Adobe Premiere Pro CS5 中大幅提高編
輯的速度。
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
1.安裝時選試用安裝,安裝好後,(如果你不使用一、4.的hosts小腳本,可以手動進行以下操作)修改hosts:

打開終端,鍵入 sudo /Applications/TextEdit.app/Contents/MacOS/TextEdit /etc/hosts(注意 sudo前邊有空格)要注意的是轉換許可權過程中需要輸入密碼,空密碼是不允許的(如果你的帳號是空密碼,請先去改改吧)
沒意外的話會出現文字編輯器,在打開的hosts檔最下面加上以下127.0.0.1 XXX代碼:
127.0.0.1 activate.adobe.com
127.0.0.1 practivate.adobe.com
127.0.0.1 ereg.adobe.com
127.0.0.1 activate.wip3.adobe.com
127.0.0.1 wip3.adobe.com
127.0.0.1 3dns-3.adobe.com
127.0.0.1 3dns-2.adobe.com
127.0.0.1 adobe-dns.adobe.com
127.0.0.1 adobe-dns-2.adobe.com
127.0.0.1 adobe-dns-3.adobe.com
127.0.0.1 ereg.wip3.adobe.com
127.0.0.1 activate-sea.adobe.com
127.0.0.1 wwis-dubc1-vip60.adobe.com
127.0.0.1 activate-sjc0.adobe.com
127.0.0.1 adobe.activate.com
127.0.0.1 209.34.83.73:443
127.0.0.1 209.34.83.73:43
127.0.0.1 209.34.83.73
127.0.0.1 209.34.83.67:443
127.0.0.1 209.34.83.67:43
127.0.0.1 209.34.83.67
127.0.0.1 ood.opsource.net
127.0.0.1 CRL.VERISIGN.NET
127.0.0.1 199.7.52.190:80
127.0.0.1 199.7.52.190
127.0.0.1 adobeereg.com
127.0.0.1 OCSP.SPO1.VERISIGN.COM
127.0.0.1 199.7.54.72:80
127.0.0.1 199.7.54.72

2.安裝adobe大師版或者單個adobe軟體,打開軟體再輸入以下隨便一組SN就可以完成註冊了
1325-0742-6238-7407-1242-6814
1325-0224-6081-7924-2537-9878
1325-0529-4958-2338-7643-2197
1325-0971-9639-6533-2029-7805
1325-0445-2906-3119-6186-8002
1325-0049-7842-6249-6141-8983
1325-0678-8050-4981-1337-8429
1325-0671-2509-1381-3854-2559
1325-0203-4623-7344-3045-3817

3.Start After effects, load a movie apply color finesse effect
a request window will pop up
use any name you want and
use as serial
CFLEM30-103803-863554-708076-512430-0200 to activate it

http://mydbt.net/mac/z0342.htm

window:

1. Go To MainDrive:\Windows\System32\drivers\etc
2. Copy Hosts File To Here
3. Confirm Overwrite

1. Disconnect Internet (JUST TO BE 100% SURE ADOBE CAN NOT CONNECT DURING INSTALLATION)
2. Install Adobe CS5.5 As a Trial
3. Open Any Application from Adobe CS5.5
4. Accept T&c, Click Next Enter Serial: 1325-1009-4363-8914-0673-0209
5. Reconnect To Internet

Once done the Application you selected to open will open and CS5.5  IS FULLY ACTIVATED
All files are from original source and 100% virus free
if you experience any problems please feel free to ask in comments
IF YOU DOWNLOADED THIS PLEASE SHOW YOUR THANKS BY SEEDING!!!

Thankyou For Downloading
This Download Was Brought To You By Ric

127.0.0.1 crl.verisign.net CRL.VERISIGN.NET ood.opsource.net
127.0.0.1 activate.adobe.com
127.0.0.1 activate-sea.adobe.com
127.0.0.1 practivate.adobe
127.0.0.1 practivate.adobe.com
127.0.0.1 practivate.adobe.newoa
127.0.0.1 practivate.adobe.ntp
127.0.0.1 practivate.adobe.ipp
127.0.0.1 adobeereg.com
127.0.0.1 activate.wip1.adobe.com
127.0.0.1 activate.wip2.adobe.com
127.0.0.1 activate.wip3.adobe.com
127.0.0.1 activate.wip4.adobe.com
127.0.0.1 www.adobeereg.com
127.0.0.1 hl2rcv.adobe.com
127.0.0.1 wip.adobe.com
127.0.0.1 wip1.aobe.com
127.0.0.1 wip2.adobe.com
127.0.0.1 wip3.adobe.com
127.0.0.1 wip4.adobe.com
127.0.0.1 www.wip.adobe.com
127.0.0.1 www.wip1.adobe.com
127.0.0.1 www.wip2.adobe.com
127.0.0.1 www.wip3.adobe.com
127.0.0.1 www.wip4.adobe.com
127.0.0.1 3dns.adobe.com
127.0.0.1 3dns-1.adobe.com
127.0.0.1 3dns-2.adobe.com
127.0.0.1 3dns-3.adobe.com
127.0.0.1 3dns-4.adobe.com
127.0.0.1 adobe-dns.adobe.com
127.0.0.1 adobe-dns-1.adobe.com
127.0.0.1 adobe-dns-2.adobe.com
127.0.0.1 adobe-dns-3.adobe.com
127.0.0.1 adobe-dns-4.adobe.com
127.0.0.1 ereg.adobe.com
127.0.0.1 ereg.wip.adobe.com
127.0.0.1 ereg.wip1.adobe.com
127.0.0.1 ereg.wip2.adobe.com
127.0.0.1 ereg.wip3.adobe.com
127.0.0.1 ereg.wip4.adobe.com
127.0.0.1 wwis-dubc1-vip60.adobe.com
127.0.0.1 activate-sjc0.adobe.com

Jun 22

Windows Vista, 7 Auto-Login to Bypass the Logon Screen

Computer Comments Off on Windows Vista, 7 Auto-Login to Bypass the Logon Screen

Here’s how to enable auto-login:

  1. Open the Start Menu, type “netplwiz,” and press Enter.
    Note: If using the Windows Classic Start menu, you need to click on Run, enter “netplwiz”, and click OK.
  2. Uncheck the Users Must Enter a User Name and Password to Use This Computer option, as shown in Figure:
    netplwiz
    A. Choose the user account you want to allow to log on automatically.
    B. Select Users Must Enter a User Name and Password to Use This Computer.
  3. Click Apply.
  4. In the Automatically Log On window, enter the username and password (twice) for the account you want to auto-login, and click OK.
  5. Click OK to exit. Remember to come back to WebTechGeek.com for more How To Tips.
Jun 09

20 Windows 7 Keyboard Shortcuts You Must Know

Computer Comments Off on 20 Windows 7 Keyboard Shortcuts You Must Know

From Desktop

  1. Windows Key + Tab = Aero [press Tab to cycle between Windows]
  2. Windows Key + E = Windows Explorer is launched.
  3. Windows Key + R = Run Command is launched.
  4. Windows Key + F = Search (which is there in previous Windows versions too)
  5. Windows Key + X = Mobility Center
  6. Windows Key + L = Lock Computer (It is there from the earlier versions as well)
  7. Windows Key + U = Ease of Access
  8. Windows Key + P = Projector
  9. Windows Key + T = Cycle Super Taskbar Items
  10. Windows Key + S = OneNote Screen Clipping Tool [requires OneNote]
  11. Windows Key + M = Minimize All Windows
  12. Windows Key + D = Show/Hide Desktop
  13. Windows Key + Up = Maximize Current Window
  14. Windows Key + Down = Restore Down / Minimize Current Windows
  15. Windows Key + Left = Tile Current Window to the Left
  16. Windows Key + Right = Tile Current Windows to the Right
    [Continue pressing the Left and Right keys to rotate the window as well]
  17. Windows Key + # = Quicklaunch
  18. Windows Key + = = Magnifier

From Windows Explorer

19. Alt + Up = Go up one level
20. Alt + Left/ Right = Back/ Forward

Jun 09

How to Do a Repair Install to Fix Windows 7

Computer Comments Off on How to Do a Repair Install to Fix Windows 7

Are you in trouble with your installed Windows 7? Looking to repair upgrade install to fix Windows 7? I suggest first try out the System Restore or any other easier option to fix the installed Windows 7. A clean reinstall is not easy. Moreover, you insist to preserve your user accounts, data, programs and system drivers. The only way you could do this is to Repair Install to Fix Windows 7.
Here are steps you need to follow o Repair install Windows 7

Step 1

Start the Windows 7 and log on to administrator account

Step 2

Disable the 3rd party antivirus, firewall or any such security program. These may interfere with the repair upgrade installation of Windows 7.

Step 3

Load the Windows 7 installation DVD into the DVD drive. Now click on the Run Setup.exe option in the Autoplay window from within the currently installed Windows 7.

Step 4

Next click on the Install Now button to start the installation

Step 5

Uncheck the I want to help make Windows installation better box. Following this click on the Go online to get the latest updates for installation option.

Step 6

Windows 7 will search online to install any available installation updates.

Step 7

Look for the I accept the license terms box and check it. Then click on Next.

Step 8

Follow it by clicking on the Upgrade option. Now the installation of Windows 7 will begin.

Step 9

After the final restart a blank screen appears

Step 10

Type in your Windows 7 product key number

Step 11

First uncheck the Automatically activate Windows when I’m online box at the bottom. After this click on the Next button.

Step 12

Now click on the Use recommended settings.

Step 13

Choose your Time Zone. Set the time and date setting and click on the Next button.

Step 14

Click on the option for your computer’s location to select the correct network location type setting that has to be applied for the location.

Step 16

Now Windows 7 prepares your desktop to startup

Step 17

It’s not over yet. Now, ensure that you are not missing any user file.

Step 18

In case some users files are missing copy them from the hidden protected operating system – C:\$INPLACE.~TR and C:\WINDOWS.~Q folders.

Step 19

Run the Disk Cleanup. For this click on the Clean up system file button. After this check the Files discarded by Windows upgrade box.

Step 20

Refresh the Windows Experience Index (WEI) score.

Finally you are done with the repair work. Activate the Windows 7 and enjoy.

Nov 16

11-15-2009 11-42-46 PM

omg = =” youtube always making surprise
after 720p (fmt 22), now they release fmt 37 as 1080p
for people request for REAL HD
now they supported REAL HD as 1080p on youtube.
That’s mean if your HDTV to watch youtube now
however i only found 1 video as fmt 37 till today so far
[1080p fmt=37] Time Leap Paradise – Djibril / ジブリール

Tried to embed the video in fmt 37, but it seem only support on youtube
so please click the link to youtube and try it
and you’ll see it will pop an option from HD button for 1080p or 720p
11-16-2009 12-30-27 AM

Nov 14

How to delete GPT Protective Partition

Computer Comments Off on How to delete GPT Protective Partition

In Windows XP Professional, if you cannot access or modify GPT disk, you can convert a GPT disk to MBR by using the clean command in DiskPart, which will remove all data and partition structures from the disk.

  1. You might see S2VR HD 5 Drives in GPT status.
  2. Go to DOS command line (click on “Start Menu”, then “Run”, type in “cmd” in textbox, and hit “OK”)
    • Type in “DiskPart” in command line.
    • Type in “list disk” in command line to show all disks in this machine.
    • Use “select” to set the focus to the specified partition, for example “select disk 1″.
    • Use “clean” command to remove GPT disk from the current in-focus disk by zeroing sectors.
  3. Go back to Disk Management, you can see all S2VR HD disks are “unallocated” now. Right click on disk info, choose “Initialize Disk”.
  4. Choose all drives in S2VR HD and initialize them.

Warning: This command will erase all data on the disk, so please backup your data first.

Oct 21

Custom shortcuts in the “Save As” dialog box

Computer Comments Off on Custom shortcuts in the “Save As” dialog box

saveas00a
Tired of looking your folder when you download and save to your specific folder?
why the shortcut have the “recent docs” or “Network” button but you never use at all? = =”
here is the way to make your own shortcut

  1. Click Start and select Run. In the Run window enter gpedit.msc and click OK.
    saveas01
  2. The Group Policy editor will appear.
    saveas02
  3. In the left window select the + (plus sign) next to User Configuration to expand the list. Next select the plus sign next to Administrative Templates and then Windows Explorer. Finally, select the Common Open File Dialog entry.
    saveas03
  4. Double-click the Items displayed in Places Bar entry in the main Group Policy window.
    saveas05
  5. The Items displayed in Places Bar Properties window will open.
    saveas06
  6. Select Enabled and then enter in the locations you’d like to have displayed in the Save As dialog box. You need to enter the full path to the location for the shortcuts to work. For example, if you want to have a shortcut to your My Documents folder, enter in:
    C:\Documents and Settings\Your User Name\My Documents\
    Once you’ve entered in all the locations you’d like to appear in the Save As window, click Apply and then OK.
    saveas07
    or you can use shortcut as it list here
    saveas07a
  7. Back in the Group Policy editor, you should see that the Items displayed in Places Bar is now Enabled. Close the Group Policy editor.
    saveas08
  8. Test it out by saving a file – you should now have the new shortcuts displayed.
    saveas09
    The same shortcuts will be used in the Open dialog box – not just the Save As box.
  9. This will also work in Windows Vista (didn’t try on Windows 7 yet)
    vista
Oct 01

Removing Store Arrows in iTunes 8/9

Computer Comments Off on Removing Store Arrows in iTunes 8/9

I just installed back iTunes 9, and find out the store arrow button pop out again on fresh installation…. = =” yeah so annoying

here the fix:

OS X Fix

Go to Terminal and type:

defaults write com.apple.iTunes show-store-arrow-links -bool FALSE

Windows XP & Vista Fix

  • Ensure iTunes is not open. Browse to the iTunes Application Data folder (C:Documents and SettingsUserApplication DataApple ComputeriTunes on XP, C:UsersUserAppDataRoamingApple ComputeriTunes (AppData is a hidden folder) on Vista, substituting the drive letter and the user profile name where necessary.
  • Backup and open the iTunesPrefs.xml with WordPad.
  • Find the User Preferences key, and below the <dict> tag insert:<key>show-store-arrow-links</key>
    <data>
    AA==
    </data>
  • Launch iTunes & the store arrows will be gone.
[mwai-form-field id='mwai-nrv4c0w1n' label="Label: " type="input" name="LABEL" options="%5B%5D" placeholder=""]
[mwai-form-output id="mwai-6mbxme8au"]
[mwai-form-submit id="mwai-2qx04zh28" label="Submit" prompt="" output_element=""]
[mwai-form-container id="1jd4pzfcv" theme="ChatGPT"]